Attention:
- The thicker the leather, the greater the power of the machine required, this mold must be used with a professional machine.
- Suitable for a thickness of 2.5mm or above (Leather below 2.5mm needs to be used with silicone pads, not equipped with silicone pads)
- When pressing, pay attention to the front and back of the mold, and don't misplace it when pressing or will cause the damage to the mold.
- It is recommended to press the mold first, then fix the upper and lower molds before pressing the leather.
This mold needs to be used with a press, and the effect is related to the pressure (Normally 10 tons)
The product picture shows the extrusion effect of a 10-ton hydraulic press
