Floral Leather Embossing Mold Collection A, 8 Designs

Description

Floral Leather Embossing Mold Collection A

This collection includes eight individual floral embossing mold designs featuring layered petals, flowing leaves, ruffled blossoms, and decorative botanical shapes.

Each design is sold separately. Please select your preferred style from A1 to A8 before placing your order.

Important – Please Read Before Purchase

• This listing is for ONE aluminum leather embossing mold in your selected design.
• It is NOT a finished leather patch.
• The eight designs shown are separate purchasing options and are not included as a complete set.
• A hydraulic press is required for the best and most consistent embossing result.
• Vegetable-tanned leather is recommended.
• The leather pieces, silicone pad, hydraulic press, and other tools shown in the photos are not included.

How To Use

1. Lightly spray the vegetable-tanned leather with clean water until the surface is evenly damp. Do not completely soak the leather.

2. Secure the mold firmly in the center of the hydraulic press and make sure it remains flat and stable.

3. Place a soft silicone pad on the lower pressing surface.

4. Position the damp leather over the silicone pad and carefully align the mold above the area to be embossed.

5. Begin with lower pressure and gradually increase it until the desired embossing depth is achieved.

6. An 8–10 ton electric hydraulic press is recommended. However, the correct pressure may vary depending on the machine, leather thickness, moisture level, silicone pad, and individual characteristics of the leather.

7. Always make a test impression on scrap leather before embossing your final project.

Available Designs

A
B
C
D
E
F
G
H

Please check the labeled listing photos carefully before selecting your design.

Product Details

Material: 2A12 aluminum
Mold type: Single-piece embossing mold
Design collection: Floral Collection A
Available styles: A1–A8
Approximate size: 50–60 mm
Measurement note: Sizes vary slightly between designs and are measured manually
Recommended leather: Vegetable-tanned leather
Recommended equipment: Electric hydraulic press
Suggested press capacity: Approximately 8–10 tons, depending on the machine and leather

Package Includes

• 1 x aluminum leather embossing mold in the selected design

Please Note

• Please select only one design from A1 to A8.
• This listing does not include all eight molds unless otherwise clearly stated.
• The photographed leather impressions are examples of the finished embossing effect.
• Actual embossing depth and detail may vary depending on leather thickness, moisture level, pressure, machine type, silicone pad, and operator technique.
• Slight machining marks may appear on the aluminum surface and do not affect normal use.
• Because the dimensions are measured manually, a small measurement difference may occur.

Suitable For

• Leather wallets
• Bags and purses
• Leather patches
• Notebook covers
• Decorative panels
• Holsters and sheaths
• Vegetable-tanned leather projects
• Floral leathercraft designs

Production & Shipping

Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.

For EU delivery, each order must not exceed €150. Please place separate orders within this limit.