Description
Repeating Floral Belt Leather Stamp
A highly detailed continuous leather embossing mold featuring flowing floral elements, layered leaves and decorative scroll details.
This is ONE single-sided leather embossing mold.
The pattern is designed to connect continuously, allowing you to repeat the impression along belts, straps and other long leather projects.
Mold size:
190mm*38mm
⚠️ Important — Professional Press Machine Required
This is a large and highly detailed embossing mold and must be used with a suitable professional press machine.
Hand hammering, G-clamps and ordinary hand presses will NOT produce the embossed result shown in the photos.
An electric hydraulic press around 8–10 tons is generally recommended.
However, every machine behaves differently. Leather thickness, leather temper, moisture level, silicone pad softness and pressure settings can all affect the final result.
Please test the pressure on scrap leather before embossing your final project.
How To Use
1. Lightly spray or evenly dampen the vegetable-tanned leather.
2. Secure the mold firmly and keep it centred in the hydraulic press.
3. Place a soft silicone pad over the mold.
4. Position the dampened leather carefully.
5. Adjust the pressure according to your machine and leather thickness.
6. Press evenly and check the result before increasing pressure.
7. To extend the pattern, move the leather forward and carefully align the end of the previous impression with the beginning of the mold.
8. Check the alignment carefully before pressing the next section.
Do not immediately use maximum pressure.
Different leather and different machines require different settings, so testing first is strongly recommended.
For continuous embossing, accurate positioning between each press is important. Once properly aligned, the pattern can be repeated along the length of the leather strip.
Product Details
* Design: Repeating floral vine pattern
* Mold type: Single-sided embossing mold
* Pattern type: Continuous / endless repeating design
* Mold size: To be updated
* Material: Aluminum alloy
* Suitable leather: Vegetable-tanned leather
* Recommended machine: Electric hydraulic press
* Suggested press capacity: Approx. 8–10 tons
* Professional machine required
* Cold embossing / leather pressing mold
Design Details
The design features a narrow repeating floral composition with blooming flowers, curled leaves and textured background details.
The elongated layout is especially suitable for belts and strap work.
Both ends of the pattern are arranged for continuous repetition. By carefully aligning each new impression with the previous section, the design can be extended along a much longer leather strip.
The layered relief creates a rich three-dimensional effect after pressing and is ideal for decorative leather belt projects.
Suitable For
* Leather belts
* Bag straps
* Guitar straps
* Shoulder straps
* Long leather panels
* Decorative leather straps
* Floral leathercraft projects
* Handmade leather goods
* Other continuous leather embossing projects
Please Note
* This listing is for ONE single-sided mold.
* This is a continuous repeating pattern designed for endless extension.
* Mold size will be added after measurement.
* Measurements are taken manually and may have slight differences.
* The embossed leather shown in the photos was made using a hydraulic press.
* Final embossing depth depends on leather thickness, moisture, pressure, machine performance and pressing time.
* Continuous patterns require careful alignment between each impression.
* Slight machining marks on the side or back of the mold do not affect normal use.
* Leather, hydraulic press, silicone pad and other tools shown in the photos are not included.
* Please make sure you have a suitable professional press before ordering.
Production & Shipping
Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.
For EU delivery, each order must not exceed €150. Please place separate orders within this limit.
Planning a belt or repeating pattern? Watch the belt stamp alignment and repeat-pattern tutorial alongside your mold’s individual setup notes.
Reviews
There are no reviews yet.