Description
REPEATING FLORAL SCROLL BELT LEATHER STAMP 197mm*28mm
A highly detailed continuous leather embossing mold featuring elongated floral elements, acanthus-style leaves and flowing decorative scrollwork.
This is ONE single-sided repeating leather embossing mold.
The pattern is designed to connect continuously, allowing the impression to be extended along belts, straps and other long leather projects.
Mold size:
197mm*28mm
⚠️ Important — Professional Press Machine Required
This is a professional pressure embossing mold and must be used with a suitable professional press machine.
Hand hammering, G-clamps and ordinary hand presses will NOT produce the embossed result shown in the photos.
An electric hydraulic press around 8–10 tons is generally recommended.
However, every machine behaves differently. Leather thickness, leather temper, moisture level, silicone pad softness and pressure settings can all affect the final result.
Please test the pressure on scrap leather before embossing your final project.
How To Use
1. Lightly spray or evenly dampen the vegetable-tanned leather.
2. Secure the mold firmly and keep it centred in the hydraulic press.
3. Place a soft silicone pad over the mold.
4. Position the dampened leather carefully.
5. Adjust the pressure according to your machine and leather thickness.
6. Press evenly and check the result before increasing pressure.
7. To extend the pattern, move the leather forward and carefully align the next section with the previous impression.
8. Check the alignment carefully before pressing the next section.
Do not immediately use maximum pressure.
Different leather and different machines require different settings, so testing first is strongly recommended.
For continuous embossing, accurate positioning between each press is important. Once properly aligned, the pattern can be repeated along the length of the leather strip.
Product Details
- Design: Floral scroll and acanthus leaf pattern
- Mold type: Single-sided embossing mold
- Pattern type: Continuous / endless repeating design
- Mold size: To be updated
- Material: Aluminum alloy
- Suitable leather: Vegetable-tanned leather
- Recommended machine: Electric hydraulic press
- Suggested press capacity: Approx. 8–10 tons
- Professional machine required
- Cold embossing / leather pressing mold
Design Details
The design features an elongated flowing composition with stylized floral forms, long leaves, curled scroll details and textured background areas.
The narrow vertical layout is specifically designed for belts and strap projects.
The pattern can be repeated continuously by carefully aligning each new impression with the previous section, allowing a much longer decorative pattern to be created from a single mold.
The deep relief and fine carved details create a strong three-dimensional effect after pressing and give the leather a classic Western floral carving appearance.
Suitable For
- Leather belts
- Belt blanks
- Guitar straps
- Bag straps
- Shoulder straps
- Long leather panels
- Western leathercraft
- Decorative leather straps
- Handmade leather goods
- Other continuous leather embossing projects
Please Note
- This listing is for ONE single-sided repeating mold.
- This is a continuous repeating pattern designed for endless extension.
- Mold size will be added after measurement.
- Measurements are taken manually and may have slight differences.
- The embossed leather shown in the photos was made using a hydraulic press.
- Final embossing depth depends on leather thickness, moisture, pressure, machine performance and pressing time.
- Continuous patterns require careful alignment between each impression.
- Slight machining marks on the side or back of the mold do not affect normal use.
- Leather, hydraulic press, silicone pad and other tools shown in the photos are not included.
- Please make sure you have a suitable professional press before ordering.
Production & Shipping
Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.
For EU delivery, each order must not exceed €150. Please place separate orders within this limit.
Planning a belt or repeating pattern? Watch the belt stamp alignment and repeat-pattern tutorial alongside your mold’s individual setup notes.
Reviews
There are no reviews yet.