Description
REPEATING FLORAL BELT LEATHER STAMP 177mm*30mm
A repeating single-sided leather embossing mold featuring a long vertical western floral design with flowing leaves, scroll elements and a classic carved flower layout.
This is ONE single-sided repeating leather embossing mold.
This type of endless embossing mold is especially suitable for:
– Leather belts
– Strap panels
– Long leather strips
– Guitar straps
– Bag straps
– Decorative leather trim
– Other long leathercraft projects
The design creates a continuous floral carving effect on vegetable-tanned leather and is ideal for belt-style projects that need an elegant repeating western floral pattern.
⚠️ Important — Professional Press Machine Required
This is a professional pressure embossing mold and must be used with a suitable press machine.
Hand hammering, G-clamps and ordinary hand presses will NOT produce the embossed result shown in the photos.
An electric hydraulic press around 8–10 tons is generally recommended.
However, every machine behaves differently. Leather thickness, leather temper, moisture level, silicone pad softness and pressure settings can all affect the final result.
Please test the pressure on scrap leather before embossing your final project.
How To Use
1. Lightly spray or evenly dampen the vegetable-tanned leather.
2. Secure the mold firmly and keep it centred in the hydraulic press.
3. Place a soft silicone pad over the mold.
4. Position the dampened leather carefully.
5. Adjust the pressure according to your machine and leather thickness.
6. Press evenly and check the result before increasing pressure.
Do not immediately use maximum pressure.
Different leather and different machines require different settings, so testing first is strongly recommended.
Product Details
- Design: Repeating western floral belt pattern
- Mold type: Single-sided embossing mold
- Pattern type: Endless / repeating belt mold
- Material: Aluminum alloy
- Suitable leather: Vegetable-tanned leather
- Recommended machine: Electric hydraulic press
- Suggested press capacity: Approx. 8–10 tons
- Professional machine required
- Cold embossing / leather pressing mold
Design Details
The pattern features a vertically flowing floral composition with large carved petals, leaf forms and classic western scrollwork details.
Because the design is arranged as a repeating strap pattern, it works especially well on belts and other long narrow leather pieces.
The engraved details create a clear layered relief effect after pressing and help achieve a strong hand-carved leather look.
Suitable For
- Leather belts
- Belt blanks
- Strap work
- Guitar straps
- Bag straps
- Wallet strap details
- Decorative trim panels
- Handmade leathercraft projects
Please Note
- This listing is for ONE single-sided repeating mold.
- Size information is not included here yet and can be added later to the listing photos.
- The embossed leather shown in the photos was made using a hydraulic press.
- Final embossing depth depends on leather thickness, moisture, pressure, machine performance and pressing time.
- Slight machining marks on the side or back of the mold do not affect normal use.
- Leather, hydraulic press, silicone pad and other tools shown in the photos are not included.
- Please make sure you have a suitable professional press before ordering.
Production & Shipping
Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.
For EU delivery, each order must not exceed €150. Please place separate orders within this limit.
Planning a belt or repeating pattern? Watch the belt stamp alignment and repeat-pattern tutorial alongside your mold’s individual setup notes.
Reviews
There are no reviews yet.