Description
Sleeping Puppy & Teddy Bear Leather Stamp
A highly detailed round leather embossing mold featuring a peaceful sleeping puppy cuddled beside a small teddy bear.
This is ONE single-sided leather embossing mold.
Mold size:
Approx. 78 mm diameter
⚠️ Important — Professional Press Machine Required
This is a large and highly detailed embossing mold and must be used with a suitable professional press machine.
Hand hammering, G-clamps and ordinary hand presses will NOT produce the embossed result shown in the photos.
An electric hydraulic press around 8–10 tons is generally recommended.
However, every machine behaves differently. Leather thickness, leather temper, moisture level, silicone pad softness and pressure settings can all affect the final result.
Please test the pressure on scrap leather before embossing your final project.
How To Use
1. Lightly spray or evenly dampen the vegetable-tanned leather.
2. Secure the mold firmly and keep it centred in the hydraulic press.
3. Place a soft silicone pad over the mold.
4. Position the dampened leather carefully.
5. Adjust the pressure according to your machine and leather thickness.
6. Press evenly and check the result before increasing pressure.
Do not immediately use maximum pressure.
Different leather and different machines require different settings, so testing first is strongly recommended.
Product Details
- Design: Sleeping puppy with teddy bear
- Mold type: Single-sided embossing mold
- Shape: Round
- Mold diameter: Approx. 78 mm
- Material: Aluminum alloy
- Suitable leather: Vegetable-tanned leather
- Recommended machine: Electric hydraulic press
- Suggested press capacity: Approx. 8–10 tons
- Professional machine required
- Cold embossing / leather pressing mold
Design Details
The design shows a sleeping puppy resting peacefully beside a small teddy bear.
Fine engraving captures the puppy's soft fur, relaxed facial expression, paws and ears, together with the textured teddy bear and surrounding fabric details.
The layered relief creates a rich three-dimensional effect after pressing and is especially suitable for larger decorative leather projects.
Suitable For
- Leather patches
- Wallet covers
- Notebook covers
- Bags and pouches
- Leather panels
- Pet-themed leather projects
- Handmade leather gifts
- Decorative leathercraft projects
Please Note
- This listing is for ONE single-sided mold.
- Mold diameter is approximately 78 mm.
- Measurements are taken manually and may have slight differences.
- The embossed leather shown in the photos was made using a hydraulic press.
- Final embossing depth depends on leather thickness, moisture, pressure, machine performance and pressing time.
- Slight machining marks on the side or back of the mold do not affect normal use.
- Leather, hydraulic press, silicone pad and other tools shown in the photos are not included.
- Please make sure you have a suitable professional press before ordering.
Production & Shipping
Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.
For EU delivery, each order must not exceed €150. Please place separate orders within this limit.
Package Contents
The mold or molds in your selected option are supplied in a cardboard box. Positioning and alignment frames, presses, leather and silicone pads shown in demonstrations are not included.
Reviews
There are no reviews yet.