Flower Leather Stamp Mold Collection E – 15 Designs

Description

Flower Leather Stamp Mold – Collection E

This listing includes 15 different floral leather stamp designs, labeled A–O in the option image.

Please select the letter of the design you would like from the drop-down menu.

IMPORTANT:
– Each option includes ONE individual leather stamp mold only.
– This listing is not a complete set of 15 molds.
– Please check the option letters carefully before placing your order.
– A press machine is required to achieve the embossed results shown in the photos.

How To Use:

1. Lightly spray or dampen the vegetable-tanned leather evenly.

2. Secure the mold firmly and place it in the center of the hydraulic press.

3. Position the damp leather against the engraved surface of the mold.

4. Place a soft silicone pad behind the leather so that the leather sits between the mold and silicone pad.

5. Apply pressure gradually and evenly.

An electric hydraulic press of approximately 8–10 tons is recommended. However, every press machine, leather thickness, moisture level and leather temper behaves differently.

Please always test the pressure, moisture level and pressing time on a scrap piece of leather before embossing your finished project.

Product Details:

• Collection: Flower Stamp Collection B
• Available options: A–O
• Number of designs: 15
• Mold type: Single-sided leather stamp mold
• Approximate size: 50–60 mm at the longest or widest point
• Measurements are taken manually and may vary slightly between designs
• Material: 2A12 super duralumin
• Suitable for vegetable-tanned leather
• Designed for use with a press machine

Leather Recommendation:

• Vegetable-tanned leather is recommended.
• Leather approximately 2.5 mm or thicker normally produces the clearest raised impression.
• For thinner leather, a soft silicone pad is especially important to help the leather conform to the engraved details.
• Embossing results depend on leather thickness, moisture, pressure, pressing time and machine performance.

Suitable For:

• Wallets
• Handbags
• Leather panels
• Journal covers
• Card holders
• Leather ornaments
• Handmade leather accessories
• Floral leathercraft projects

Package Includes:

• One selected 2A12 aluminum leather stamp mold

Leather pieces, silicone pads, press machines and other tools shown in the photos are not included.

Please Note:

• Photos of embossed leather are sample results used to demonstrate the pattern.
• Leather colour, surface texture and finishing are not included with the mold.
• Slight machining marks may be present on the sides or back of the mold and do not affect normal use.
• Please confirm your selected option letter before completing your purchase.

Production & Shipping

Made to order. Production takes 1–2 weeks before shipment. Delivery time after dispatch depends on the destination.

For EU delivery, each order must not exceed €150. Please place separate orders within this limit.